Global Active Technologies
Automated
Hot Air BGA
Rework
Station
Hot Air BGA
Rework
Station
Specifications :
PCB dimension: W20×20~W350×350mm
PCB thickness: 0~4mm
BGA dimension: uo to 70mm×70mm
Working table adjustment: ±10MM forward/backward,±10MM left/right
Lower hot-air heater: 800W
Upper hot-air heater: 800W
Bottom pre heater infrared: 2700W
Temperature control: K-type thermocouple close cycle controlled
PCB locating way: Outer or Jig
Power supply: single-phase 220V,50/60Hz,4.5KW
Machine dimension: L600×W600×H750mm
Weight: Approx. 60Kgs
Features :
* The streamline design is gorgeous and room-saving.
* Hot air head and mounting head are designed 2 in 1, and have
both the auto soldering and mounting function.
* Upper/lower hot-air heating ,bottom infra red, three independent
heating areas, temperature and time can be displayed digitally on
the touch screen.
* Powerful cross flow fans cool the bottom heating zone rapidly and
constantly.
* Color optical system with functions of spilt vision, zoom-in and
micro-adjust, equipped with aberration detection device; with auto
focus and software operation function, 22X optical zoom.
* Touch screen interface, PLC control, real-time temperature curve
display, able to display temperature curves and two detecting
curves at the same time.
* Color LCD monitor
* Built-in vacuum pump;60 rotating in φ angle mounting nozzle is
micro-adjustable.
* 6 segments of temperature up (down) and 6 segments constant
temperature control, 200 groups of temperature curves are stored;
curve analysis can be carried out on the touch screen and has the
communication function as computer, with software attached.
* Suction nozzle can identify material and mounting height
automatically, and can control the air pressure within a small range.
* Equipped with different hot air nozzles, easy to replace and able to
locate in any angle.
* Big size splint, equipped with deformation-proof supporting
device, suitable for the accurate rework of all kinds of PCB.
PCB dimension: W20×20~W350×350mm
PCB thickness: 0~4mm
BGA dimension: uo to 70mm×70mm
Working table adjustment: ±10MM forward/backward,±10MM left/right
Lower hot-air heater: 800W
Upper hot-air heater: 800W
Bottom pre heater infrared: 2700W
Temperature control: K-type thermocouple close cycle controlled
PCB locating way: Outer or Jig
Power supply: single-phase 220V,50/60Hz,4.5KW
Machine dimension: L600×W600×H750mm
Weight: Approx. 60Kgs
Features :
* The streamline design is gorgeous and room-saving.
* Hot air head and mounting head are designed 2 in 1, and have
both the auto soldering and mounting function.
* Upper/lower hot-air heating ,bottom infra red, three independent
heating areas, temperature and time can be displayed digitally on
the touch screen.
* Powerful cross flow fans cool the bottom heating zone rapidly and
constantly.
* Color optical system with functions of spilt vision, zoom-in and
micro-adjust, equipped with aberration detection device; with auto
focus and software operation function, 22X optical zoom.
* Touch screen interface, PLC control, real-time temperature curve
display, able to display temperature curves and two detecting
curves at the same time.
* Color LCD monitor
* Built-in vacuum pump;60 rotating in φ angle mounting nozzle is
micro-adjustable.
* 6 segments of temperature up (down) and 6 segments constant
temperature control, 200 groups of temperature curves are stored;
curve analysis can be carried out on the touch screen and has the
communication function as computer, with software attached.
* Suction nozzle can identify material and mounting height
automatically, and can control the air pressure within a small range.
* Equipped with different hot air nozzles, easy to replace and able to
locate in any angle.
* Big size splint, equipped with deformation-proof supporting
device, suitable for the accurate rework of all kinds of PCB.